12 AWG 3 C CPE TRAY CABLE (XHHW-2 CONDUCTORS)

Tray Cable UL Type TC / TC-ER – 600V XLPE Insulation – CPE Jacket

DESCRIPTION

Tray Cable UL Type TC / TC-ER – 600V XLPE Insulation – CPE Jacket

APPLICATION

Primarily used for power, control, signal, communication and lighting circuits in commercial and industrial environments. Suitable for installation in cable trays, supported by messenger in open air, raceways, channels, conduits and ducts. Approved for direct burial applications and outdoors in cable tray where sunlight resistant rating is required. Also may be installed in wet or dry locations or in areas exposed to chemicals and oils.

PART NUMBER

12-03TC-XLPCPE

STANDARDS

• UL Listed as TC-ER (Exposed Run) per UL Standard 1277 and used in accordance with NEC for 3 or more conductors • Approved for Class 1 or 2, Division 2 industrial hazardous locations per NEC • Individual conductors pass UL VW-1 flame test and rated XHHW-2/VW1, UL 1581/UL 2556 VW-1 • Rated at 90°C wet or dry • Oil Res I & II • “Heavy Duty” rating per ICEA Standards • Meets cold bend test at -25°C • NEMA WC70/ICEA S-95-658, NEMA WC57/ICEA S-73-532 • IEEE 1202 and CSA FT4 70,000 BTU Flame Test • IEEE 383 70,000 BTU Vertical Flame Test • ICEA T-29-520 210,000 BTU

JACKET COLOR

BLACK

JACKET

Flame and sunlight resistant black thermoplastic Cross-linked Chlorinated Polyethylene (XL-CPE) rated 90°C wet or dry per UL 1277. Excellent flame resistance that allows the jacket to burn to an ash and does not exhibit the thermoplastic drip characteristic. Ripcord provided for jackets with thickness of 60 mils or less.

CONDUCTORS

Fully annealed tinned copper Class B compressed strand per ASTM B-33 and ASTM B-8

COLOR CODE

ICEA Method 1, Table E-2

INSULATION

Flame retardant Cross-linked Polyethylene (FR-XLPE) that is heat and moisture resistant. Also has a VW-1 rating and is XHHW-2 per UL 44

SHIELD

UNSHIELDED

ASSEMBLY

Conductors are cabled together with or without fillers as required to form a round, compact cable core with a binder tape

CONDUCTOR SIZE (AWG)

12

NO. OF CONDUCTORS

3

NO. OF STRANDS

7

ISULATION THICKNESS (INCHES)

0.03

INSULATION THICKNESS (MM)

0.76

JACKET THICKNESS (INCHES)

0.045

JACKET THICKNESS (MM)

1.14

OVERAL DIAMTER (INCHES)

0.415

NEW WEIGHT

130

Premium Wire & Cable Materials for Longevity & Durability

Premium Wire & Cable Materials for Longevity & Durability

Get the products you can trust: Tested & Certified.